Camera Support / SteadiCam / Pilot

SteadiCam Pilot

Steadicam Pilot, includes arm and vest. We recommended The Pilot for cameras weighing between 2 to 10 pounds as the ultimate choice for the DSLR cameras and smaller prosumer cameras that are so popular with today's inde filmmakers.
NOTE: One hour of Initial training in our facility included in purchase price or rental rate.

$225.00 / day

A new version of the PILOT™ system has been introduced. Through a strategic alliance with IDX System Technology Inc., this new system is shipped with two (2) E-7S batteries and a special version of the VL Dual 60 Watt charger. Through this arrangement a special system price is offered that is very beneficial to the Steadicam user.

The PILOT™ with IDX battery system provides the user with a complete system. Through the addition of the users camera and a SteadiSTAND or similar balance stand the unit is ready to use. The IDX E-7S battery is based on the V-Lock mounting system and will provide power for the on board monitor and any optional accessories. Should the camera have a 12 volt input or a converter for 7.2 Volt operation the IDX battery has sufficient capacity to power both the camera, monitor and accessories. The special VL Dual charger is only available with this STEADICAM® PILOT™ system. It provides sequential charge for two batteries. The charger and batteries are not available as a separate option. Specific battery operation parameters may be found at

The PILOT™ 2-10 pound weight range will work with a wide array of cameras. This new Battery System feature is in addition to the Pilot’s other advanced capabilities.

The new Steadicam Pilot is a state of the art, lightweight stabilizer system designed especially for the modern breed of lightweight cameras from 2 to 10 pounds. Video professionals need add only battery and camera of choice as all other required system components are provided for normal operation. The Optional SteadiStand™ or Turtle Base “C” Stand, required for Steadicam balance and operation, fits neatly in the available soft carry case.

The Steadicam Pilot is designed with a lightweight Iso-elastic Arm and ultra low profile vest, lightweight sled with CarbonLite expandable post, upgradeable color 3.5” LCD Monitor, low mass gimbal and offers advanced features/benefits with low cost for the Video Professional.

The Iso-Elastic™ arm is a two-section, articulated, design that can be adjusted while supporting the camera. With this patented, unique design, the Steadicam operator can smoothly and effortlessly raise or lower the arm throughout its 28 inch boom range. The iso-elastic arm is also non-reactive – improving vertical stability and control in all operating conditions, from lock-offs to fast running shots over rough terrain.

The 3.5” LCD monitor is standard and provides good contrast from dark to light situations. The monitor weight and location on the sled assures the operator perfect balance and ease of operation.

Frictionless, Silky-Smooth Iso-Elastic Performance
Huge 28" Lifting Range
One-Touch Lift-Adjustment for each section
Lightweight Design
3.5" LCD Color Monitor
CarbonLite Expandable Center Post
New Arm / Vest Interface System
X-Y Vernier Adjustment of Stage Plate
Operates in Standard and Low modes